HOW DOES THE INVIS-A-RACK MOUNT TO THE BED
The Invis-A-Rack mounts
using an integrated clamping system and theft resistant bolts. There are
and a wrench included with the unit that attach
under the bed rail.
WHAT DOES THE SYSTEM INCLUDE?
The Invis-A-Rack includes 4
fully assembled main housings, 2 bungee boxes
(Either 6.7” or 27.7”
depending on whether you purchase the 6’ or 8’ version) and 8 clamps
used to install the unit.
All of this comes in a box that is approximately 34” x 12” x 6” and can
be sent via UPS or Fed EX.
HOW LONG DOES IT TAKE TO INSTALL? –
The Invis-A-Rack can be
installed on your truck in about 10 minutes. All you need to do is open
and take out the main
housings, bungee boxes, and 8 clamps with bolts. Install the driver side
housing with two clamps,
install the passenger side front main housing with two clamps, attach
boxes and finish with the
back driver and passenger main housings. Since our system is fully
this is the easiest
installation of any rack on the market.
NO DRILLING, ONE BOX AND
ONLY REQUIRES ONE PERSON TO INSTALL!
a PDF of the Installation Guide here)
WILL YOU HAVE ACCESSORIES TO USE WITH THE INVIS-A-RACK?
We are in the process of
completing the design on several accessories to include bike holders,
kayak and canoe holders, a
tent, cantilever arms, front to back extender arms, awnings and more.
Please check back soon!
WHAT TYPE OF WARRANTY IS ON THE PRODUCT?
There is a limited lifetime
warranty on the Invis-A-Rack. Please download a pdf of the warranty here.
HOW MUCH WILL THE INVIS-A-RACK HOLD?
The Invis-A-Rack is
designed to carry up to 500 pounds evenly distributed across
the front and rear
assemblies. It is imperative that you properly secure your load to
of your truck. Do not
use any locations on the Invis-A-Rack for securing material.
It is important when
carrying a load on top of the rack to always properly secure the load
the bed of the truck using
tie downs designed for the weight load you are carrying.
Remember, the Invis-A-Rack
is designed to hold a maximum of 500 pounds. That does not
preclude you from carrying
additional weight on your bed. However, the combined weight of
your cargo should not
exceed the maximum load rating for you vehicle. Invis-A-Rack, LLC is
not responsible for misuse
or abuse of the rack, per the enclosed warranty.
WHAT IS INVIS-A-RACK MADE OF? --
The Invis-A-Rack is made of 6000
series structural aluminum, with a black powder coat finish.
WILL THE INVIS-A-RACK WORK WITH A FIFTH WHEEL
CAMPER OR TRAILER?
Yes. We are the only
permanently installed rack that will allow you to pull a fifth wheel
having to "slide" it
forward or remove it completely from your truck. Since the profile
collapsed rack is only 3"
tall, all fifth wheels will clear the rack during maneuvers.
CAN I PULL INTO MY GARAGE?
Obviously, you don't want
to pull into your garage with your rack up and stuff on top. But
only use Invis-A-Rack when
you need it, when you're done at the end of the workday, or home from
a weekend of kayaking or
canoeing, you simply fold the Invis-A-Rack down and pull into your
DOES THE INVIS-A-RACK SAVE FUEL?
Yes. Because you only
use Invis-A-Rack when you need it and it will mostly stay in the
you will not be creating
wind drag going down the highway. Although we've not quantified
based on industry experts,
we believe the fuel savings will be between 5-10% or more over
any of the competition.